Stainless Steel Rods (Standard Capacity)
Available as a standard item in
diameters to suit UNF threads 5/16" to 1". Rods are cut to length and can
be machined with both left and right-hand threads. Minimum breaking loads are based on the core
diameter of the thread. Cold heading is also available as a
special order item. Rods are available up to 12-feet in
length. Rod Connectors are used for spans greater than
12-feet. Click on the rod photo for more details.
|
Sta-Lok® Rod Connectors (Standard Capacity)
Required for rod spans greater than 12-feet in length. Rod Connectors are threaded left-hand one end
and right-hand other end to ensure that the rod assembly
remains secure during tensioning. They are designed to
develop the full load of the rods and are available in sizes
to suit UNF threads 5/16" to 1". Click on the Rod Connector
photo for more details.
|
Sta-Lok® Tension Forks (Standard Capacity)
Our most commonly used end fitting. Available in left
and right-hand UNF threads 5/16" to 1". Each fork
comes with a conical nut (CN) and double headed clevis pin. The combination of a left-hand Tension
Fork on one end of a rod assembly with a right-hand Tension Fork on the other end provides the most
symmetrical design and most economical method of adjusting
and tensioning rod rigging systems. See our Standard Assemblies page
for information on our standard tension fork assemblies. Also click on the Tension Fork photo for
more details.
|
Sta-Lok® Fixed Fork Ends (Standard Capacity)
Available with only right-hand UNF threads 5/16" to 1".
Designed for assemblies that have a fixed span
length or assemblies that have a turnbuckle for adjustment and tensioning. We also carry a variety
of turnbuckles for use with Fixed Fork End rod assemblies.
Turnbuckle styles include chrome plated open body forged
bronze, slotted tubular body stainless steel and closed
tubular body stainless steel. Our sales representatives can
assist with assembly design and product recommendations.
Fixed Fork Ends are non-stock items and are only available
by special order. Click on the Fixed Fork End photo for more details.
|
Send this page to the printer
Back to the site
